TL;DR: Listed products need a PS Mark or an ICC sticker before they are distributed in the Philippine market. A local manufacturer gets a PS license for its own line. An importer gets an Import Commodity Clearance (ICC) from the DTI Bureau of Philippine Standards (BPS) for the listed goods it brings in, and those goods are inspected before customs releases them.
What is the PS Mark and the ICC?
The PS Mark and the ICC sticker show that a product meets the relevant Philippine National Standards (PNS). BPS says both marks tell consumers the product is certified. The requirement applies to products under BPS’s mandatory product certification schemes. Those products must carry a PS mark or ICC sticker before they are distributed in the Philippine market, whether made locally or imported.
The legal base is older than most importers expect. Republic Act No. 4109, the Standards Law approved on June 20, 1964, turned the Division of Standards into a Bureau of Standards. Section 3 gives that bureau charge over “the inspection and certification of the quality of commodities imported into the Philippines.” The Consumer Act, Republic Act No. 7394, sets the consumer side. Article 5 declares a policy to protect the public against unreasonable risks of injury from consumer products. Article 14 says consumer products “shall be distributed in commerce only after inspection and certification.”
There are two clearances and two audiences. The PS license is for manufacturers. The ICC is for importers. A company can need both.
Which products are on the list?
The BPS list covers nine categories:
- Household appliances
- Consumer electronics
- Lighting and wiring devices
- Steel products
- Plastic pipes and ceramic products
- Cement and other construction materials
- Chemical products
- Automotive related products
- Other consumer products
Do not rely on a category name alone. Check the product against the numbered items on the current BPS list. A product that sounds like a listed category may not be on it. The BPS list page does not show the order or DAO number that set it, so cite the BPS page itself when you check a product.
Food products fall under a separate FDA licensing route. For food businesses, see the FDA license to operate guide.
How does a local manufacturer get a PS license?
The BPS requirements page lists the documents for a PS license. The core set is:
- Articles of incorporation or business name registration, plus any subcontracting agreement.
- A controlled copy of the quality manual.
- A short description of the manufacturing process.
- The reference number of the product identification file, covering process flow, materials, process control and drawings.
- A list of measuring and testing equipment, with serial numbers and proof of ownership, for each inspection point and the final test.
- A maintenance and calibration program, with calibration certificates.
- Copies of labels, markings and logos, as the standard requires.
- A description of the supply and distribution chain. A new business names its target market. A foreign company names its Philippine principal and describes how it relates to the applicant.
- A vicinity map of the factory.
- A signed undertaking to follow the terms of the PS license, annexed to the application form.
Items 4 to 6 are the ones a factory without written process controls will struggle to produce. Start with the quality manual and the equipment list, not the application form.
How does an importer get an ICC?
The importer’s file is shorter but has more government counterparts. The BPS page lists these documents:
- Packing list.
- Commercial invoice.
- Bill of lading or airway bill.
- A summary of batch or serial numbers.
- Business registration. A sole proprietor files its DTI business name registration. A corporation files its SEC certificate of incorporation.
- Authority documents. A sole proprietor gives a special power of attorney. A corporation gives a board or partners’ resolution, or a notarized secretary’s certificate, that names the authorized representative.
- A surety bond.
- A BIR Importers Clearance Certificate.
- Current proof of billing for the office and the warehouse.
- The manufacturer’s ISO 9001 certificate.
- A valid test report.
Some products carry extra items. Rerolled steel bars, deformed steel bars and equal leg angle bars need a logo submitted to BPS before importation, plus a mill certificate or quality inspection report from the manufacturer. Motorcycle helmets and visors need a test report for each brand, type and model, a manufacturer’s certificate of conformity for the batch, and an updated list of distributors or retailers.
Two rules on the page matter in practice. Every photocopy must be certified true and correct by the authorized signatory. And the import entry does not have to be filed with the ICC application, but it is required for release of the ICC certificate. That second rule ties the DTI clearance to the customs process.
What happens at customs without an ICC?
Customs is where the statute places enforcement, so it is worth reading the law directly. RA 4109 has three relevant provisions:
- Section 4(d) requires inspection “before any commodity imported into the Philippines is discharged and/or released by the Bureau of Customs.”
- Section 6 says no product “of the Philippines” for which a standard has been established may be sold without the required certification. It also makes collectors of customs responsible for enforcing the prohibition on importation.
- Section 7 sets imprisonment of six months to two years for a violation of Section 6.
The BPS requirements page says the import entry is required before the ICC certificate is released. Put together, a shipment of listed goods that arrives without its clearance should not pass customs release. The exact steps for a held shipment, such as any conditional release, sampling or re-inspection, are set by BPS and the Bureau of Customs. Do not plan around a specific route until BPS confirms it in writing.
How does the ICC fit with importer accreditation?
Accreditation and the ICC answer different questions. Customs accreditation, covered in our guide to accredited importers, makes your company a registered importer with the Bureau of Customs. The ICC shows that a listed product is certified. A customs accreditation does not show that a product is compliant, and a product certificate does not register you as an importer.
Timing matters. Ask suppliers for the test report and the ISO 9001 certificate before you commit to a purchase order, since both appear on the ICC list. If you are importing for resale, the foreign-owned import and distribution company guide covers the company side of the same decision.
What do foreign-owned companies get wrong?
Treating a foreign safety mark as enough. The ICC file asks for a valid test report and the manufacturer’s ISO 9001 certificate. A CE or other foreign mark on the box is not on that list. Ask the supplier for the documents the BPS page names.
Assuming online sales are exempt. The BPS page does not mention a separate rule for online sellers. It frames the requirement around distribution in the Philippine market. Confirm the list before you publish a listed product for sale. For what an online seller must disclose and register under the Internet Transactions Act, see the internet transactions guide.
Keeping the sticker off the product. BPS monitors stock rooms and warehouses. If the sticker is on the packaging, the importer, distributor or retailer must keep the box or package available for DTI verification. Failing to show the package during monitoring is treated as a violation.
Forgetting the Philippine principal. A foreign company applying for a PS license must name its Philippine principal and explain the relationship. The file asks for it, so leaving it out means an incomplete application.
Using a generic board resolution. The ICC needs a resolution or notarized certificate that names the authorized representative. A resolution that does not name the person does not meet the requirement.
Sending uncertified copies. Every photocopy must be certified true and correct by the authorized signatory. The page makes this a shared requirement, so check every page before you submit.
Assuming the list is fixed. BPS maintains the mandatory list. Check the current version before each new product line, not after the first shipment is already in the warehouse.
What should you do next?
Start with a product list. For each item, check the BPS list, confirm which supplier documents exist, and decide whether you need a PS license, an ICC or both. Then collect the ICC documents while the purchase order is still open. Online sellers should confirm the same list before they list a product, using the e-commerce business service page as the starting point for the company setup.
This guide is general information, not legal advice on your products. The BPS list and the customs procedures change. Confirm current requirements with BPS before you import. If you want a review of your product list and documents, book a consultation with Chamberlain.
Frequently asked questions
Do I need a PS Mark or an ICC for a product I import?
Only if the product is on the DTI Bureau of Philippine Standards mandatory certification list. For those products, the BPS page says the product must bear a PS mark or an ICC sticker before distribution in the Philippine market, whether it was made locally or imported. Check the current list on the BPS site before you order.
Is an ICC the same as importer accreditation with the Bureau of Customs?
No. Customs accreditation registers you as an importer. The ICC is a DTI clearance for a listed product, and the BPS page describes it as the mark that shows the product is certified. You may need both, and one does not replace the other.
Can a foreign-owned company apply for a PS license for its own factory?
The BPS application requirements for a PS license ask foreign companies to identify their Philippine principal and describe the relationship between the applicant and that principal. A foreign-owned manufacturer therefore needs a Philippine principal named in its file.
What happens if my shipment arrives without an ICC?
Section 4(d) of RA 4109 requires inspection before an imported commodity is released by the Bureau of Customs, and Section 6 makes customs collectors responsible for enforcing the prohibition. The procedure for a held shipment is set by BPS and the Bureau of Customs. Confirm it with BPS and your customs broker before the goods ship.
How can a buyer check whether a product's mark or sticker is genuine?
For an ICC sticker, BPS points buyers to the ICC Verification Mobile App. For a PS mark, the BPS Standards Conformity Division can be reached at bps.scd@dti.gov.ph, or at the phone numbers listed on the BPS page.
Official sources
Primary references this guide is checked against.
- DTI Bureau of Philippine Standards: PS Mark and ICC sticker
- DTI Bureau of Philippine Standards: List of products under mandatory certification
- DTI Bureau of Philippine Standards: PS and ICC application requirements
- Lawphil: Republic Act No. 4109, Standards Law (1964)
- Lawphil: Republic Act No. 7394, Consumer Act of the Philippines
Related guides
SEC vs DTI registration for foreigners in the Philippines
Compare SEC and DTI registration routes for foreign founders in the Philippines, check conditional DTI eligibility, and plan the separate BIR registration.
Accredited Importer in the Philippines: BOC CPRS
There is no generic import license in the Philippines. Here is how BOC's CPRS accreditation works, plus how import duty and 12% VAT get calculated.
Articles of Incorporation and Bylaws in the Philippines
What the articles of incorporation must contain under RA 11232 Sec. 13, the standard form in Sec. 14, and how by-laws are adopted and amended.
